Electrical SERVICES

EV Charger Installation Sydney

Power up at home, ready to go. Charging off a standard socket is slow and risky. CGF installs dedicated home and business EV chargers across Sydney. Licensed, AS/NZS 3000 compliant, upfront quotes.

Call Us Now

A Proper EV Charger Beats the Wall Socket Every Time

Charging your electric car off a regular power point might seem fine at first, until you realise it takes all night to add a handful of kilometres and your socket is getting warm in the process. It’s slow, inefficient and wasn’t designed for the load an EV pulls hour after hour.

CGF installs dedicated EV chargers for homes and businesses across Sydney. A proper wall mounted charger delivers around 40–50 km of range per hour on single phase power, and more on three phase depending on your vehicle, so your car is actually ready when you need it. We handle the full job: site assessment, switchboard check, cable run, mounting, app setup and certification, so you plug in at night and drive away fully charged in the morning.

Under Australian law, a hardwired EV charger must be installed by a licensed electrician and comply with AS/NZS 3000 (the Wiring Rules), including its specific requirements for EV charging. We’re fully licensed, we do it properly and we leave you with a Certificate of Compliance and a system that works from day one.

Call Us Now

Home EV Charger Installation

For most Sydney homes, a 7kW single-phase charger is the sweet spot: fast enough to fully charge your EV overnight, usually without a switchboard upgrade. If you’ve got three-phase power, we can step up to 11kW or 22kW for an even faster turnaround, depending on what your car can accept.

A standard home installation typically runs between 1,800 and 2,500 including the charger, labour and certification. Simpler jobs with easy cable runs can fall around 1200 1,800, while more complex setups with long cable runs or switchboard upgrades might push toward $3,000. We quote upfront, no surprises.

We also install Tesla Wall Connectors. The Gen 3 unit pairs perfectly with Tesla vehicles and can integrate with your solar and battery system to charge your car with sunshine you’ve already generated.

Commercial EV Charger Installation

Businesses across Sydney are getting ahead of the EV curve. Staff, customers and tenants are all driving electric and a workplace without a charger is starting to look like a workplace without Wi‑Fi.

We install commercial chargers for offices, retail centres, strata buildings, medical practices and fleet depots. Whether you need one bay or twenty, our commercial electrical team handles the design, installation, load management and future expansion planning. Every commercial install starts with a full site assessment, switchboard and load evaluation and a written feasibility report. We also coordinate with strata committees and property managers, handling approvals, shared billing and compliance.

  • Site inspection and load assessment – We check your switchboard, measure available capacity and plan the neatest cable route before we quote anything.
  • Charger selection – We'll recommend a unit that matches your vehicle, your home's electrical setup and your budget, not the most expensive one on the shelf.
  • Dedicated circuit and proper protection – Every charger gets its own circuit with RCD protection that detects DC faults (Type B, or Type A with 6mA DC detection), cable sized for the charger and run length (typically 6mm² for 32A domestic installs) and a suitable isolation switch.
  • Clean, compliant installation – Wall mounted or pedestal, indoor or outdoor. Outdoor units are rated for weather protection (typically IP44 or higher).
  • App setup and smart charging – We connect your charger to Wi Fi, configure the app and show you how to schedule charging for off peak rates or solar integration.
  • Full testing and certification – Every install is tested under load and comes with a Certificate of Compliance. You're covered and your warranty stays intact.
  • Licensed electricians, not subcontractors, fully compliant with AS/NZS 3000 and AS/NZS 3018.
  • We drive EVs ourselves, so we understand what actually works and what doesn't.
  • Clean installs with proper cable management, no ugly conduit running across your garage wall.
  • Solar and battery integration handled in house, one team, no finger pointing.
  • Site specific solutions, not generic kits.

FAQs - EV Charger Installation Sydney

No. Most Australian homes run on single phase power and a 7kW single phase charger is more than enough for overnight charging delivering 40–50 km of range per hour. Three phase lets you run up to 22kW and is worth considering if you drive high daily mileage, have multiple EVs or want the fastest possible home charge.
Yes. We specialise in Tesla charger installation across Sydney, including the Gen 3 Wall Connector. It can be installed as a standalone unit or integrated with your existing solar and battery system for maximum savings.
Level 1 uses a standard 10 amp power point, slow and not recommended for daily charging. Level 2 is a dedicated wall charger delivering 7kW to 22kW of AC power, the standard for Australian homes and workplaces. DC fast chargers are commercial grade units delivering 25kW to 420kW, typically found at public charging stations.
Not always but it’s common. Many older Sydney homes have switchboards that are near capacity and adding a dedicated 32A circuit for an EV charger can push them over the limit. We’ll assess your board during the site inspection and tell you exactly what’s needed, no unnecessary upsells.
Yes and it’s one of the smartest ways to run an EV. We can set your charger to prioritise solar generation during the day, effectively filling your car’s battery with free sunshine. If you don’t have solar yet, we can pre wire the charger so it’s ready for panels or a battery down the track.
Yes. We work with strata committees and property managers across Sydney; approvals, load management, shared billing arrangements and full compliance with building and state regulations.