CGF Security

Contact us today!

How to deactivate an alarm system?

An alarm generally goes off when something is wrong, AKA someone is breaking in. but if you have checked everywhere and cannot find anything amiss, your alarm system would not understand that everything is alright. It could be a fault in the system that can be turned off so you can go back to your sleep.

In this blog, we will talk about how you can deactivate your alarm system.

How to deactivate the alarm system?

The following are the steps you need to go through one by one to deactivate your alarm system:

Check if it is safe

The first thing you need to ensure is that it is safe before deactivating your alarm system. Go around the house with caution and check every nook and cranny to see if you are being burgled or not. You should move on to the next steps only when you find no sign of an intruder.

Enter your code

If your alarm system has a code processor, entering the code should be the first thing on your mind. Once you enter the code, the system should stop beeping. If it does not, it means it is a power failure.

Change the batteries

The next step in how to deactivate the alarm system is changing its batteries. A low or dead battery can cause the system to beep for no reason. Open the control panel, find the battery and detach it from the circuit. Reconnect the new battery and see if it works.

Check the transformer

If the screen says ‘NO AC’ or something of that sort, it probably means the problem is in the transformer or wall outlet. Check if the plug is secured rightly. If it is, unplug the transformer to make the beeping stop.

Check the landline connection

If you have one of those old landline-connected alarm systems, you need to check your landline connection. Pick up your landline and see if it works. If you hear a dial tone, it means it is dead and needs to be fixed along with the alarm system.

Get out that user manual

It is highly unlikely that none of the above would work in your case. But in case that happens, you need to search for your user manual and see what it says about this problem. And if you find nothing, you will have to call your alarm system company.

Conclusion

Those were the way how to deactivate the alarm system. First, you need to check if it is safe, then enter your code, change the batteries, check the transformer, check the landline connection and find your user manual.

If nothing from these solutions works, you need to make a service call and ask them how you can fix it.

You Might Also Enjoy