CGF Security

Contact us today!

How To Install CCTV Cameras

With the increasing crime rate in many places, people have become more alert regarding the safety of their houses and workplace. However, it is impossible to be alert and watch out all the time.

With this, the best equipment to help you ensure security is a CCTV camera. CCTV cameras help you monitor your home, office, shop or garage by recording what’s happening. In case of a mishap, you at least have leads to follow.

CCTV installation might seem tedious, from finding the correct location to setting up the system. You might also be wondering if you need a license to install CCTV or not. If you plan to install a CCTV camera at your home or shop, keep reading this article to learn about the process.

Location for CCTV Cameras

Before you install a CCTV camera at your location, it is important to identify and strategically install the camera for the best view. Also, whilst deciding the place, you must consider the camera range and the cable length to get the power socket nearby. You can also go for a wireless system if the wiring system is complicated.

Here is a list of some of the best places where you can install the CCTV camera to ensure security:

  • Ground floor windows

Windows away from the street are the primary location for thieves to enter the house. So make sure to install a CCTV camera right there to identify them. You can also install smart window locks for ultra-security.

  • All the entrances

If your house has multiple entrances, then make sure to install a CCTV camera at each entrance. You can put the camera towards the sidewalk to capture the faces of the people approaching your door. You can also put a cage around the CCTV camera to prevent it from getting tampered with or destroyed by burglars. Patio areas and french doors are more prone to break-ins, so be sure to have CCTV installation at these locations.

  • Detached and garage buildings

Garage and detached structures are the most ignored part of the house or building, and this makes them favorite entry points of burglars. Thus, install a CCTV camera at this location to ensure the safety of your vehicles.

  • Backyard area of the house

Whilst placing the camera in the backyard, make sure it covers every inch of the backyard and eliminates any blind spots. You can also add a security light apart from the CCTV installation to ensure ultra safety.

  • Second-floor area of the house

If your house has multiple floors, secure the second floor with a CCTV camera to protect your valuable assets. Putting an indoor camera in the main hallway will give you a clear view of the burglars.

Steps To Install CCTV Cameras

CCTV installation is a technical process. It is ideal to contact professionals to help you throughout the process and clear all your doubts, such as do you need a license to install CCTV.

  • Step 1:

Identify and mark the spot where you want to install the camera. Make a hole and insert the raw plugs before putting the bracket on it. It would be best if you threaded the wiring behind the wall using a wired camera to attach it to the monitor. Also, the hole should be big enough to get the wire through.

  • Step 2:

Now, attach the camera and secure it with a screw. Plug the power into the socket. If you are using a wireless camera, you don’t have to give a power supply to it. However, their batteries will need to be charged.

  • Step 3:

Make sure to install the digital video recorder in a secure place. It is advisable to keep it inside a locked compartment to safeguard your surveillance data. Wireless CCTV cameras mostly use network video recorders which you can install in the same way as DVR.

  • Step 4:

The next step is to connect the network cable to the internet router.

  • Step 5:

Make sure to connect each camera to the NVR and then connect to the screen where you will view the area. Use an HDMI monitor for a higher resolution and better view.

  • Step 6:

Once you are done with all these things, check the video to see whether you can view the intended area. If you find any blind spot, adjust it at the correct angle.

Tips for Installing a CCTV Camera

Here are a few tips for CCTV installation which will help you in getting the best results:

  • Keep height 8–10 feet from the ground.

Make sure the camera you are installing is 8–10 feet above the ground, as this height is enough to catch the minute details of a person. This height is also high enough to avoid tampering and damage caused to the camera.

  • Check out for the sun.

Whilst installing the camera, ensure you don’t point your camera toward the sun to prevent glare in your images. Check the sun’s movement throughout the day and then decide the camera’s angle as per the light.

  • Safeguard your camera.

Get water and weatherproof security cameras, so they do not get tampered with because of external elements. Find CCTV cameras that are specifically designed to bear all environmental conditions. However, you can also get an additional cover for your camera to ensure its safety.

  • Consider the windows.

Never place the camera pointing out of the windows, as this can cause reflection issues and reduce the video quality. You can also find infrared technology cameras, which reflect off the glass.

CGF Security & Electrical: Reliable and Smart Security Solutions

CCTV cameras have become a must because of the increasing crime rate. However, the process of installing is a bit complicated for someone who doesn’t have technical knowledge. If you want to install a CCTV camera at your home, office or shop in that case, you can contact us at CGF Security & Electrical. We are professionals who will ensure the perfect CCTV installation in your place.

Contact us today.

You Might Also Enjoy